• Part Number: P01120418
  
• Current range: 0.1 A AC .. 240 A AC
  
• Rated current: 200 A AC
• Output signal: alternating current
• Transformation ratio: 1,000/1
• Output via lead and isolated Ø 4 mm male plugs
• Outputprotected against voltage surges

• ELECTRICAL SPECIFICATIONS:
• Current range: 0.1 A AC .. 240 A AC
• Current transformation ratio: 1000 / 1
• Output signal: 1 mA AC / A AC (240 mA for 240 A)
• Bandwidth: 40 Hz .. 10 kHz
• Crest factor: 5 for a current of 280 A peak
• Maximum currents: 200 A continuous for a frequency ≤  3 kHz (limitation proportional to the inverse of one third of frequency beyond)
• Load impedance: ≤ 10 Ω
• Maximum output voltage (secondary open): Limited to 8 V peak max.
• Operating voltage: 600 VRMS
• Common mode voltage: 600 V category III and pollution degree 2
• Influence of adjacent conductor: ≤ 15 mA / A at 50 Hz
• Influence of conductor position in jaws: ≤ 0.5 % of output signal at 50/60 Hz
• Load influence: 0.1 .. 5 Ω; < 0.5 % on measurement; < 0.5 ° on phase
• Influence of frequency Ip < 150 A (2): < 5 % of output signal from 40 Hz .. 1 kHz; < 15 % of output signal from 1 kHz .. 10 kHz; add 5 % error if 150 A < Ip < 200 A
• Influence of crest factor: <  3  % of output signal for crest factor <  5 with current < 280 A peak (50 ARMS)
• MECHANICAL SPECIFICATIONS:
• Operating temperature: -10 °C to +55 °C
• Storage temperature: -40 °C to +70 °C
• Influence of temperature: ≤ 0.20 % of output signal per 10 °K
• Relative humidity for operation: 0 to 85 % RH decreasing linearly above 35 °C
• Influence of relative humidity: < 0.2 % of output signal from 10 % to 85 % RH
• Operating altitude: 0 to 2,000 m
• Max. jaw opening: 20 mm
• Clamping capacity: Cable: Ø max 20 mm
• Busbar: 1 busbar of 20 x 5 mm
• Casing protection rating: IP40 (IEC 529)
• Drop test: 1 m (IEC 68-2-32)
• Shock resistance: 100 g (IEC 68-2-27)
• Vibration resistance: 10 / 55/10 Hz, 0.15 mm (IEC 68-2-6)
• Self-extinguishing capability: Casing: UL94 V2; Jaws: UL94 V0
• Dimensions: 135 x 51 x 30 mm
• Weight: 180 g
• Colours: Dark grey case with red jaws
• Output: 1.5 m two-wire lead with double or reinforced insulation terminated by 2 elbowed male safety plugs (4 mm)
• SAFETY SPECIFICATIONS:
• Electrical safety: Instrument with double insulation or reinforced insulation between the primary, the secondary and the grippable part located under the guard as per IEC 1010-1 & IEC 1010-2-032
• 600 V category III, pollution degree 2
• 300 V category IV, pollution degree 2
• Electromagnetic compatibility (EMC): EN 50081-1: class B; EN 50082-2:
• Electrostatic discharge: IEC 1000-4-2
• Radiated field: IEC 1000-4-3
• Fast transients: IEC 1000-4-4
• Magnetic field at 50 Hz: IEC 1000-4-8
• (1) Conditions of reference: 23 °C ± 3 °K, 20 to 70 % RH, sinusoidal signal with frequency of 48 Hz to 65 Hz, external magnetic fi eld < 40 A/m, no DC components, no external conductor with circulating current, conductor centred for measurement, 1 Ω load.
• (2) Out of reference domain

• (1) MN21 - AC Clamp Meter Adapter
  
• (1) Instruction Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice